Patent • #9,653,230. A push plate that includes springs in the form of cantilever flexures and an inspection window is disclosed. The push plate provides a known, uniform, down force and minimal torque to a package to be tested. The cantilevers have a known, calculable down force producing stiffness. The window provides...
Search
Pyroelectric demodulating detector
Patent • #7,397,301. A pyroelectric demodulating detector (also termed a pyroelectric demodulator) is disclosed which utilizes an electrical resistor stacked upon a pyroelectric element to demodulate an rf or microwave electrical input signal which is amplitude-modulated (AM). The pyroelectric demodulator, which can be formed as a hybrid or a monolithic device, has...
Quadrature mixture LO suppression via DSW DAC noise dither
Patent • #7,259,716. A Quadrature Error Corrected Digital Waveform Synthesizer (QECDWS) employs frequency dependent phase error corrections to, in effect, pre-distort the phase characteristic of the chirp to compensate for the frequency dependent phase nonlinearity of the RF and microwave subsystem. In addition, the QECDWS can employ frequency dependent correction vectors to...
Quadrilateral finite element mesh coarsening
Patent • #8,289,322. Techniques for coarsening a quadrilateral mesh are described. These techniques include identifying a coarsening region within the quadrilateral mesh to be coarsened. Quadrilateral elements along a path through the coarsening region are removed. Node pairs along opposite sides of the path are identified. The node pairs along the path...
Quadrilateral/hexahedral finite element mesh coarsening
Patent • #8,290,754. A technique for coarsening a finite element mesh ("FEM") is described. This technique includes identifying a coarsening region within the FEM to be coarsened. Perimeter chords running along perimeter boundaries of the coarsening region are identified. The perimeter chords are redirected to create an adaptive chord separating the coarsening...
Quantitative detection of pathogens in centrifugal microfluidic disks
Patent • #9,903,001. A system and methods for detection of a nucleic acid including forming a plurality of nucleic acid detection complexes are described, each of the complexes including a nucleic acid analyte, a detection agent and a functionalized probe. The method further including binding the nucleic acid detection complexes to a...
Quantum Communications and Networking
Portfolio •
Quantum Science
Technology Area • The Quantum Science technology area contains advances in the understanding and mastery of quantum systems for the manipulation of information with greater sensitivity, speed, and security than is possible with classical information processing methods. This technology area also contains specialized portfolios related to: Quantum Computing Materials & Qubit TechnologiesQuantum...
Quantum-size-controlled photoelectrochemical etching of semiconductor nanostructures
Patent • #9,276,382. Quantum-size-controlled photoelectrochemical (QSC-PEC) etching provides a new route to the precision fabrication of epitaxial semiconductor nanostructures in the sub-10-nm size regime. For example, quantum dots (QDs) can be QSC-PEC-etched from epitaxial InGaN thin films using narrowband laser photoexcitation, and the QD sizes (and hence bandgaps and photoluminescence wavelengths) are...
Quenching of Unincorporated Amplification Signal Reporters (QUASR)
Featured Opportunity • Sandia’s QUASR modification to LAMP helps satisfy the requirements for a simple, robust, and inexpensive point-of-care deployed diagnostic device Rapid changes in how the world must react to pandemics has led to an unprecedented effort to develop rapid, easy to interpret point-of-care tests that meet the World Health Organization (WHO)...
Radar & THz
Technology Area • The Radar & Terahertz (THz) technology area contains advances in detection and imaging using THz waves developed for security, biomedical, and communications applications. Sandia has been at the forefront of new radar breakthroughs for more than 30 years, including historic developments in Synthetic Aperture Radar (SAR). This technology area...
Radar Design
Portfolio •
Radar echo processing with partitioned de-ramp
Patent • #8,400,349. The spurious-free dynamic range of a wideband radar system is increased by apportioning de-ramp processing across analog and digital processing domains. A chirp rate offset is applied between the received waveform and the reference waveform that is used for downconversion to the intermediate frequency (IF) range. The chirp rate...
Radar velocity determination using direction of arrival measurements
Patent • #9,846,229. The various technologies presented herein relate to utilizing direction of arrival (DOA) data to determine various flight parameters for an aircraft A plurality of radar images (e.g., SAR images) can be analyzed to identify a plurality of pixels in the radar images relating to one or more ground targets....
Radial Particle-Based Terrestrial Thermocline for High Temperature Thermal Storage
Patent • #11,549,761.
Radiation Detection
Portfolio •
Radiation detector using a graphene amplifier layer
Patent • #11,287,536. A radiation field is detected or imaged using one or more junction devices in which a two-dimensional conductor layer is capacitively coupled to a semiconductor absorber layer. In the junction devices, pixel-level amplification and read-out are accomplished through the photogating of the devices by absorption within the absorber layer...
Radiation source with shaped emission
Patent • #6,563,907. Employing a source of radiation, such as an electric discharge source, that is equipped with a capillary region configured into some predetermined shape, such as an arc or slit, can significantly improve the amount of flux delivered to the lithographic wafers while maintaining high efficiency. The source is particularly...
Radiation-hardened transistor and integrated circuit
Patent • #7,298,010. A composite transistor is disclosed for use in radiation hardening a CMOS IC formed on an SOI or bulk semiconductor substrate. The composite transistor has a circuit transistor and a blocking transistor connected in series with a common gate connection. A body terminal of the blocking transistor is connected...
Radical-ion battery and operation thereof
Patent • #10,879,552. A electrochemical storage device, referred to herein as a radical-ion battery, is described. The radical-ion battery includes an electrolyte, first free radicals, and second free radicals, wherein the first free radicals and the second free radicals are different chemical species. The radical-ion battery also includes a separator that allows...
Radio Frequency (RF) Systems
Portfolio •
Ram-air sample collection device for a chemical warfare agent sensor
Patent • #6,442,997. In a surface acoustic wave sensor mounted within a body, the sensor having a surface acoustic wave array detector and a micro-fabricated sample preconcentrator exposed on a surface of the body, an apparatus for collecting air for the sensor, comprising a housing operatively arranged to mount atop the body,...
Randomization of dangling nodes in a digital circuit design to mitigate hardware trojans
Patent • #10,706,181. Described herein are various technologies pertaining to randomizing logic associated with dangling nodes in a digital circuit design. A dangling node is an input to or output from a logic gate in the digital circuit design that is identified as not impacting a desired output of the digital circuit...
Rapid Automated Point-of-Care System (RapiDx)
Featured Opportunity • The Rapid, Automated Point-of-Care System (RapiDx) developed by Sandia National Laboratories is a portable diagnostic instrument. RapiDx quickly measures--with high sensitivity--disease and toxin biomarkers in human biological samples (e.g., blood, saliva, urine) so that patient ailments can be quickly diagnosed and treated. RapiDx is an ideal instrument for point-of-care diagnostics...
Rapid Electropulsing Method
Featured Opportunity • A rapid electropulsing method to reduce chemical microsegregation in metallic additively manufactured (AM) parts comparable to conventional heat-treatment techniques in a fraction of the processing time For many applications, the promise of rapid development and fabrication through the additive manufacture (AM) of ready-to-use, geometrically complex parts cannot be realized due...
Results 1676–1700 of 2,278